DriveRack 4800 Sinyal İşleyici
Teknik Özellikler:- Input (4) total
- Input Connectors Female XLR
- Input Type Electronically balanced, RF filtered
- Insert Impedance >50k ohm
- Max Input Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu
- CMRR >40 dB typical, >55 dB at 1 kHz
- Digital Inputs (4) AES/EBU Channels
- Digital Input Connectors Female XLR
- Digital Input Type Transformer Isolated, RF filtered
- Digital Input Impedance >110 ohms
- Mic Preamp Connector (RTA) - (1) Female XLR
- Mic Preamp gain (RTA) 10dB to 50dB in 10dB increments
- Output 8 total
- Output Connectors Male XLR
- Output Type Electronically balanced, RF filtered
- Output Impedance 30 ohms
- Max Output Software selectable for: +24, +22, +20, +12, +8, +4 dBu
- Digital Output (8) AES/EBU Channels
- Digital Output Connector Male XLR
- Digital Output Type Transformer Isolated, RF filtered
- Digital Output Impedance >110 ohms
- A/D Converter dbx Typve IV™ Converstion System
- A/D Dynamic Range >114 dB unweighted, 116dB A-weighted
- Type IV Dynamic Range 128dB with transient material, A-weighted, 22kHz BW 126 dB with transient material, unweighted, 22 kHz BW 120 dB typical with program material, A-weighted, 22 kHz BW
- Sample Rate 96kHz
- Wordlength 24 bits
- D/A Dynamic Range 112 dB unweighted, 115 dB A-weighted
- Dynamic Range 112dB unweighted, 115dB A-weighted
- Internal Processing 32 bit floating point
- THD+Noise 0.004% typical at +4 dBu, 1 kHz, 0 dB input gain
- Frequency Response 20 Hz- 40 kHz, +/-0.5 dB
- Interchannel Crosstalk <-85 dB at 1 kHz, 0 dB input gain
- Pre EQ Type One 31-band Graphic EQ on each input One EQ that is switchable between 31-band and 9-band Parametric on each input
- EQ Gain +/- 12dB
- Input Insert Processing Two selectable Insert Processing blocks per input: Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression
- Input Delay Length Up to 682 mSec available
- Routing/Mixing 4-input mixer available at each output allowing any input to be sent or mixed to any output
- Output Insert Processing Two selectable Insert Processing blocks per output: Noise Gate, AutoWarmth®, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression
- Crossover configs: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8
- Crossover Filter Type Bessel 6, 12, 18, and 24 dB per Octave Butterworth 6, 12, 18, and 24 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave
- Polarity Positive and Negative
- Phase Control 0 to -180 degrees in 5 degree increments
- Output Delay Length 1365 mSec shared between the outputs
- Transformer I/O: optional
- Controls Ethernet, RS-232, Optional dbx ZC Wall Panels
- Power Consumption 100V to 240V 50/60Hz, 45 Watts
- Dimensions 3.5"x19"x12.15"
- Unit Weight 11 lbs.
- Shipping Weight 12.5 lbs.
